Unit Power Supply Connector - Omron GX-ID1611 User Manual

6-3-4

Unit Power Supply Connector

The Connector is used to connect the unit power supply (24 VDC).
Digital I/O Slave Units, Analog I/O Slave Units, and Encoder Input
Slave Units
• Connector type: Spring connection connector with fixing screw (2-pin)
• Supported pin terminal diameter: 0.25 mm
(Pin terminal with isolation sleeve used)
For types of recommended pin terminals, refer to "4-3-3 Connecting the Unit Power Supply" in page 4 -
9.
GX-series EtherCAT Slave Unit User's Manual
6 Basic Specifications of Slave Units
Fixing screw
−V
+V
terminal terminal
2 2
to 0.5 mm /AWG24 to AWG20
Name Specification
+V
24 VDC
−V
0 VDC
6
6 - 11