Allocating Output Data - Omron GX-ID1611 User Manual

10 IO-Link Master Unit

10-2-2 Allocating Output Data

The IO-Link Master Unit has the following types of output data. You can allocate the required data in the
OUT area.
Data name
Digital Output Data
Port 1 IO-Link Process
Output Data
·
·
·
Port 8 IO-Link Process
Output Data
*1 Unit version 1.0 : No
Unit version 1.1 or later : Yes
The following data is allocated for the default settings.
• Unit version 1.0
Output offset D15 D14
(words)
0 Port 1 IO-Link Process Output Data 01 Upper Byte
+1 Port 2 IO-Link Process Output Data 01 Upper Byte
·
·
·
+7 Port 8 IO-Link Process Output Data 01 Upper Byte
• Unit version 1.1 or later
Output offset D15 D14
(words)
0 Digital Output Data Upper Byte
+1 Port 1 IO-Link Process Output Data 01 Upper Byte
·
·
·
+7 Port 7 IO-Link Process Output Data 01 Upper Byte
+8 Port 8 IO-Link Process Output Data 01 Upper Byte
10 - 6
Size
2 bytes *1
32 words × 8
Yes (2 bytes per
ports port)
D13 D12 D11 D10 D09
·
·
·
D13 D12 D11 D10 D09
·
·
·
Default I/O
allocation
This is the digital output data in SIO(DO) Mode.
This is the output data from IO-Link devices such as
actuators that are connected to port 1 in IO-Link Mode.
This is the output data from IO-Link devices such as
actuators that are connected to port 8 in IO-Link Mode.
D08 D07 D06 D05
Port 1 IO-Link Process Output Data 01 Lower Byte
Port 2 IO-Link Process Output Data 01 Lower Byte
Port 8 IO-Link Process Output Data 01 Lower Byte
D08 D07 D06 D05
Digital Output Data Lower Byte
Port 1 IO-Link Process Output Data 01 Lower Byte
Port 7 IO-Link Process Output Data 01 Lower Byte
Port 8 IO-Link Process Output Data 01 Lower Byte
GX-series EtherCAT Slave Unit User's Manual
Details
·
·
·
D04 D03 D02 D01 D00
·
·
·
D04 D03 D02 D01 D00
·
·
·