Edge Function; Leveled Sine Wave Function; Time Marker Function - Fluke 5080A/SC User Manual

Edge Function

Edge Characteristics into 50 Ω
Range
Resolution
Adjustment Range
Sequence
Frequency Range
Rise Time
Leading Edge Aberrations
Typical Duty Cycle

Leveled Sine Wave Function

Leveled Sine Wave
Characteristics into 50 Ω
Range (p-p)
Resolution
Adjustment Range
Specification, 1-Year,
tcal ±5 °C
Flatness (relative to 50 kHz)
Short-term Stability
Resolution
Specification, 1-Year,
tcal ±5 °C
nd
2 Harmonic
rd
3 and higher Harmonics
Within one hour after reference amplitude setting, provided temperature varies no more than ±5 °C.
[1]
[2] At frequencies below 120 kHz, the resolution in 10 Hz. For frequencies between 120 kHz and 999.9 kHz, the resolution is 100 Hz.

Time Marker Function

Time Marker into 50 Ω
Specification at cardinal
points, 1-Year,
±(50 + t*1500) ppm
[2]
tcal ±5 °C
Wave Shape
spike or square
Typical Output Level
Sequence
Adjustment Range
Amplitude Resolution
[1] t is the time in seconds.
Away from the cardinal points, add ±50 ppm.
[2]
riešenia na presné meranie
Amplitude
4.5 mV to 2.75 V
4 digits
±10 % around each sequence value
(indicated below)
5 mV, 10 mV, 25 mV, 50 mV, 100 mV,
250 mV, 500 mV, 1 V, 2.5 V
Other Edge Characteristics
900 Hz to 1.1 MHz
<1 ns
Within 10 ns
10 to 30 ns
After 30 ns
45 % to 55 %
50 kHz Reference
Amplitude Characteristics
±(2 % of output +300 μV)
Not applicable
Frequency Characteristics
10 Hz
±5 ppm
Distortion Characteristics
5 s to 50 ms 20 ms to 100 ns
[1]
±5 ppm
spike, square, or
sq20%
>1 V p-p >1 V p-p
5-2-1 from 5 s to 2 ns (e.g., 500 ms, 200 ms, 100 ms)
At least ±10 % around each sequence value indicated above.
http://www.elso.sk
Specification, 1-Year, tcal ±5 °C
±(2 % of output +300 μV)
±(5 ppm of setting +15 mHz)
<(3 % of output +3 mV)
<(1 % of output +3 mV)
<(0.5 % of output +3 mV)
Frequency Range
50 kHz to 100 MHz
5 mV to 5.5 V
<100 mV: 3 digits
≥100 mV: 4 digits
Continuously adjustable
±(3.5 % of output +400 μV)
±(1.5 % of output +200 μV)
[1]
≤1 %
[2]
10 kHz
±5 ppm
≤-33 dBc
≤-38 dBc
50 ns to 20 ns 10 ns
±5 ppm ±5 ppm
spike or square square or sine
>1 V p-p >1 V p-p
4 digits
Scope Calibration Option
Detailed Specifications
[1]
100 to 200 MHz
±(4 % of output +400 μV)
±(2.0 % of output +200 μV)
10 kHz
±5 ppm
5 ns to 2 ns
±5 ppm
sine
>1 V p-p
3