Pulse Generator Specifications; Trigger Signal Specifications (Pulse Function); Trigger Signal Specifications (Time Marker Function); Trigger Signal Specifications (Edge Function) - Fluke 522A/6 Operator's Manual

5522A
Operators Manual

Pulse Generator Specifications

Pulse Generator Characteristics
Typical rise/fall times
Available Amplitudes
Pulse Width
Range
[2]
Uncertainty
Pulse Period
Range
Resolution
1-Year Absolute Uncertainty at Cardinal Points, tcal ±5 °C
[1] Pulse width not to exceed 40 % of period.
Pulse width uncertainties for periods below 2 μs are not specified.
[2]

Trigger Signal Specifications (Pulse Function)

Pulse Period
22 ms to 200 ns

Trigger Signal Specifications (Time Marker Function)

Time Marker Period
2 to 9 ns
10 to 749 ns
750 ns to 34.9 ms
35 ms to 5 s

Trigger Signal Specifications (Edge Function)

Edge Signal
Frequency
900 Hz to 11 MHz

Trigger Signal Specifications (Square Wave Voltage Function)

Voltage Function
Frequency
10 Hz to 10 kHz

Trigger Signal Specifications

Trigger Signal Type
Field Formats
Polarity
Amplitude into 50 Ω load
Line Marker

Oscilloscope Input Resistance Measurement Specifications

Scope Input Selected
Measurement Range
Uncertainty

Oscilloscope Input Capacitance Measurement Specifications

Scope Input selected
Measurement Range
Uncertainty
[1] Measurement made within 30 minutes of capacitance zero reference. SC600 option must be selected for at least five minutes
prior to any capacitance measurement, including the zero process.
9-6
Division Ratio
off/1/10/100
Division Ratio
off/100
off/10/100
off/1/10/100
off/1
Typical Amplitude into
Division Ratio
50 Ω (p-p)
off/1 ≥1 V
Typical Amplitude into
Division Ratio
50 Ω (p-p)
off/1 ≥1 V
Selectable NTSC, SECAM, PAL, PAL-M
Selectable inverted or uninverted video
Adjustable 0 to 1.5 V p-p Ω, (±7 % accuracy)
Selectable Line Video Marker
50 Ω
40 to 60 Ω
0.1 %
Positive pulse into 50 Ω
<2 ns
2.5 V, 1 V, 250 mV, 100 mV, 25 mV, 10 mV
[1]
4 ns to 500 ns
5 % of pulse width ±2 ns
22 ms to 200 ns (45.5 Hz to 5 MHz)
4 or 5 digits depending upon frequency and width
±2.5 ppm
Amplitude into 50 Ω (p-p)
≥1 V
Amplitude into 50 Ω (p-p)
≥1 V
≥1 V
≥1 V
≥1 V
Typical Rise Time
≤2 ns
Typical Rise Time
≤2 ns
Parameters
1 MΩ
5 to 50 pF
±(5 % of input + 0.5 pF)
Typical Rise Time
≤2 ns
Typical Rise Time
≤2 ns
≤2 ns
≤2 ns
≤2 ns
Typical Lead Time
40 ns
Typical Lead Time
1 μs
1 MΩ
500 kΩ to 1.5 MΩ
0.1 %
[1]