Cluster Run - Cisco Catalyst 2960 Command Reference Manual

Chapter 2 Catalyst 2960 Switch Cisco IOS Commands

cluster run

Use the cluster run global configuration command to enable clustering on a switch. Use the no form of
this command to disable clustering on a switch.
Syntax Description This command has no arguments or keywords.
Defaults
Clustering is enabled on all switches.
Command Modes Global configuration
Command History Release
12.2(25)FX
Usage Guidelines When you enter the no cluster run command on a cluster command switch, the cluster command switch
is disabled. Clustering is disabled, and the switch cannot become a candidate switch.
When you enter the no cluster run command on a cluster member switch, it is removed from the cluster.
Clustering is disabled, and the switch cannot become a candidate switch.
When you enter the no cluster run command on a switch that is not part of a cluster, clustering is
disabled on this switch. This switch cannot then become a candidate switch.
Examples This example shows how to disable clustering on the cluster command switch:
Switch(config)# no cluster run
You can verify your setting by entering the show cluster privileged EXEC command.
Related Commands Command
show cluster
OL-8604-03
cluster run
no cluster run
Modification
This command was introduced.
Description
Displays the cluster status and a summary of the cluster to which the switch
belongs.
Catalyst 2960 Switch Command Reference
cluster run
2-59