Insertion Effect Settings; Making Insertion Effect Settings; User; Inst Select - Roland SoundCanvas SC-88 Pro Owner's Manual

Insertion effect settings

Making Insertion effect settings

1.
2.
3.
4.
5.
6.
7.
8.
56
This unit has two types of effects: System effects and Insertion effects.
Insertion effects provide 64 effect types. Since appropriate parameters are provided for
each effects, you can make fine adjustments to the sound for professional-level control.
* For details on System effects and Insertion effects, and on the effect structure of this unit, refer
to p.46.
Insertion effects can be applied independently to an individual Part.
Use PART [l l l l ][r r r r ] to select the Part, and INSTRUMENT [l l l l ][r r r r ] to select
the Instrument to which the effect will be applied.
Press the [EFX] button to make the indicator light orange.
Press the [ON/OFF] button to make the Effect ON/OFF indicator light, and
the Insertion effect will be turned on.
To turn it off, press the [ON/OFF] button again.
Use EFX TYPE [l l l l ][r r r r ] to select the Effect Type.
Use EFX PARAM [l l l l ][r r r r ] to select parameters.
Use EFX VALUE [l l l l ][r r r r ] to set the value of the effect parameter.
While the [ALL] indicator is lit, press the [ON/OFF] button to turn off the
Effect ON/OFF indicator, and effects will be turned off for all Parts.
Press the [EFX] button to end the procedure.
Be aware that when you change the Effect Type, the effect parameters will be initialized.
If you wish to save your parameter values, it is convenient to use a User Effect. (p.99)
7
ALL
MUTE
SC - 55
MAP
SC - 88
MAP
2 8
3
VIB RATE

USER

INST SELECT ATTACK
EFX ON/OFF EFX TYPE
* It takes awhile until the sound can be heard after you change the Patch.
* If a monaural insertion effect is turned on, the settings for Part Pan (p. 25) and Master Pan (p.
34) will be ignored. Monaural insertion effects are those such as 2: Spectrum and 35: OD->
Chorus.
In the case of stereo insertion effects, however, the settings for Part Pan (p.25) and Master Pan
(p. 34) will be effective when the insertion effect is on. Stereo insertion effects are those that
maintain discrete L/R channels all the way to the output stage such as 1: Stereo-EQ and 16:
Hexa Chorus.
* If the Insertion effect is turned on for two or more Parts, the sound of each Part will be mixed.
It will not be possible to set reverb / chorus / delay / equalizer independently for these Parts. (p.46)
For example if the Insertion effect is turned on for Part1 and Part2, and you modify the Reverb
value for Part1, the Reverb for Part2 wil automatically be modified to the same value.
For Parts for which the Insertion effect is Off, settings can be made independently for each Part.
* When 00 Thru is selected, the Insertion effect will not be applied.
Chapter 4. Insertion Effects
1
1
PART INSTRUMENT
LEVEL PAN
REVERB CHORUS
KEY SHIFT MIDI CH
DELAY
4 6
5
VIB DEPTH VIB DELAY
CUTOFF RESONANCE
DECAY RELEASE
EFX PARAM EFX VALUE