Roland SoundCanvas SC-88 Pro Owner's Manual page 45

Part Group
Part Mode
PART INSTRUMENT
LEVEL PAN
Note name
C-1 A0 C1 C2
0 21 24 36
MIDI note number
* The Note name is the name of each note (key) on the keyboard, and corresponds to the MIDI
Note Number. The Drum instrument is assigned to note number.
5.
Use the INSTRUMENT [l l l l ] [r r r r ] buttons select the Drum Instrument you
wish to edit.
Here you can also select Drum Sets. Since in both cases you use the INSTRUMENT
[l] [r] buttons to specify the number. You will need to switch between Drum Set select
mode and Drum Instrument select mode, simultaneously press both the INSTRUMENT
[l] [r] buttons. When you are selecting Drum Sets, the Drum Set number will blink.
* Be aware that if you select a different Drum Set, the parameter Value will be initialized.
6.
Use the front panel parameter buttons to modify the parameter values.
The values you set will appear in the appropriate location (field) of the display.
LEVEL [l] [r]
PAN [l] [r]
REVERB [l] [r]
CHORUS [l] [r]
EFX TYPE[l] [r]
KEY SHIFT [l] [r] : pitch coarse (adjust the pitch of each instrument in semitone steps)
MIDI CH [l] [r]
7.
To return to the previous display, simultaneously press both the
[SELECT] and EFX TYPE [l l l l ] button once again.
USER
INST
EFX
Chapter 2. Parts and paramters
Drum set number
Note Name
Drum Instrument name
C3 C4 C5
48 60 72
: set the volume of each instrument
: set the pan of each instrument
: set the reverb send level of each instrument
: set the chorus send level of each instrument
: set the delay send level of each instrument
: assign group (p.44)
1
ALL
MUTE
REVERB
SC - 55
MAP
4 7
KEY SHIFT
SC - 88
MAP
VIB RATE VIB DEPTH
SELECT ATTACK
ON/OFF EFX TYPE EFX PARAM
C6 C7 C8
84 96 108
2
5
PART INSTRUMENT
LEVEL PAN
CHORUS
MIDI CH
DELAY
VIB DELAY
CUTOFF RESONANCE
DECAY RELEASE
EFX VALUE
G9
127
5
3
43