Roland SoundCanvas SC-88 Pro Owner's Manual page 196

System Parameters [88]
Parameters affecting the entire unit, such as how the two MIDI IN connectors will function, are called System Parameters.
<MODEL ID = 42H>
Address(H) Size(H) Data(H)
00 00 7F 00 00 01 00 - 01
* Refer to "System exclusive messages related to Mode settings" (page 191).
00 01 00 00 00 01 00 - 01
: : :
00 01 0F 00 00 01 00 - 01
00 01 10 00 00 01 00 - 01
: : :
00 01 1F 00 00 01 00 - 01
* You can modify the receiving MIDI port at which channel messages will be received for each BLOCK. We suggest that normally you use PORT A for BLOCK01-0F, and
PORT B for BLOCK10-1F. (In this case there is no need to change the setting.)
* Refer to page 196 for details of each BLOCK.
Patch parameters
Patch common parameters
In MODE-1 (Single module mode) this unit functions as a single sound source module with 32 Parts. In MODE-2 (Double module mode) it functions as two sound source mod-
ules with 16 Parts each. The parameters common to all Parts in each module are called Patch Common parameters.
Address(H) Size(H) Data(H)
40 00 00 00 00 04 0018 - 07E8
40 00 01#
40 00 02#
40 00 03#
* Refer to section 5. Supplementary material, "About tuning" (page 208).
40 00 04 00 00 01 00 - 7F
40 00 05 00 00 01 28 - 58
40 00 06 00 00 01 01 - 7F
40 00 7F 00 00 01 00
* Refer to "System exclusive messages related to Mode settings" (page 191).
40 01 00 00 00 10 20 - 7F
40 01 : #
40 01 0F#
40 01 30 00 00 01 00 - 07
40 01 31 00 00 01 00 - 07
40 01 32 00 00 01 00 - 07
40 01 33 00 00 01 00 - 7F
40 01 34 00 00 01 00 - 7F
40 01 35 00 00 01 00 - 7F
40 01 37 00 00 01 00 - 7F
* REVERB MACRO is a macro parameter that allows global setting of reverb parameters. When you select the reverb type with REVERB MACRO, each reverb parameter will
be set to the most suitable value.
* REVERB CHARACTER is a parameter that changes the reverb algorithm. The value of REVERB CHARACTER corresponds to the REVERB MACRO of the same number.
* In MODE-2 (Double module mode), REVERB PREDELAY TIME cannot be used.
194
Parameter
SYSTEM MODE SET [88]
CHANNEL MSG RX PORT [88]
BLOCK00
:
BLOCK0F
BLOCK10
:
BLOCK1F
Parameter
MASTER TUNE
MASTER VOLUME
MASTER KEY-SHIFT
MASTER PAN
MODE SET
PATCH NAME
REVERB MACRO
REVERB CHARACTER
REVERB PRE-LPF
REVERB LEVEL
REVERB TIME
REVERB DELAY FEEDBACK
REVERB PREDELAY TIME [88] 0 - 127[ms]
Chapter 8. Appendix
Description Default(H)
00
00: MODE-1 (Single module mode)
01: MODE-2 (Double module mode)
(Rx. only)
PORT A - B 00
:
PORT A - B 00
PORT A - B 01
:
PORT A - B 01
Description Default Value (H)
-100.0 - +100.0 [cent] 00 04 00 00
Use nibblized data.
0 - 127 7F
(= F0 7F 7F 04 01 00 vv F7 )
-24 - +24 [semitones] 40
-63 (LEFT) - +63 (RIGHT) 40
00 = GS Reset
(Rx. only)
16 ASCII Characters
00: Room 1 04
01: Room 2
02: Room 3
03: Hall 1
04: Hall 2
05: Plate
06: Delay
07: Panning Delay
0 - 7 04
0 - 7 00
0 - 127 40
0 - 127 40
0 - 127 00
00
Description
MODE1
PORT A
PORT A
PORT B
PORT B
Descrip-tion
0 [cent]
127
0[semitones]
0 (CENTER)
Hall 2
4
0
64
64
0
0