Copying Or Exchanging Settings Between Parts / Initializing Part Settings - Roland SoundCanvas SC-88 Pro Owner's Manual

Copying or Exchanging settings between Parts / Initializing Part settings

Procedure
1.
2.
3.
4.
106
The settings of the selected Part can be copied to another Part or initialized, and you
can exchange settings between parts. By using these functions, you can create sounds
more efficiently.
Make sure that the [ALL] indicator is dark.
If it is lit, press the [ALL] button to make it go dark.
Use PART [l l l l ][r r r r ] to select the source Part.
Use the following procedure.
(A) Copy: While pressing [SELECT], press LEVEL [l].
The display will ask "
Use INSTRUMENT [l][r] to select the copy destination Part.
(B) Initialize: While pressing [SELECT], press LEVEL [r].
The display will ask "
(C) Exchange: While pressing [SELECT], press PAN [l].
The display will ask "
Use INSTRUMENT [l][r] to select the Part to be exchanged.
To execute the specified operation, press the [ALL] button.
To cancel without executing, press the [MUTE] button.
3-A Copy
ALL
MUTE
SC - 55
MAP
SC - 88
MAP
USER
INST SELECT
EFX ON/OFF EFX TYPE
3-B Clear Part
* It is not possible to copy or exchange Drum Parts.
Chapter 5. Convenient functions
"
"
1 4 2
PART INSTRUMENT
LEVEL
REVERB CHORUS
KEY SHIFT MIDI CH
DELAY
VIB RATE VIB DEPTH VIB DELAY
CUTOFF RESONANCE
ATTACK DECAY RELEASE
EFX PARAM EFX VALUE
3-C Exchange
"
PAN