Transmitting Individual Data - Roland SoundCanvas SC-88 Pro Owner's Manual

Transmitting Individual Data

Transmission procedure for Part parameters
Transmission procedure for parameters common to all parts
1.
2.
3.
4.
5.
6.
108
This data can be transmitted in one of three ways: Part parameters can be selected
from a menu and transmitted, parameters common to all Parts can be selected from a
menu and transmitted, or Insertion Effect parameters can be transmitted.
For the types of parameters which can be transmitted as Individual Data, refer to
p.150 "Parameter list and operations."
* When selecting parameters common to all Parts from the menu, the following parameters can-
not be transmitted.
Device ID
MUTE Lock
EQ Lock
Rx GM On
Rx GS Reset
Part parameters:
Press the [ALL] button to make the indicator dark.
Parameters common to all parts:
Press the [ALL] button to light the indicator.
Simultaneously press the PART [l l l l ] and [r r r r ] buttons.
Use [u u u u ][d d d d ] to select the parameter you wish to transmit.
While holding [SELECT], you can press [u][d] to jump parameters.
Part parameters:
Use PART[l l l l ][r r r r ] to select the Part which will transmit the parameter,
and use INSTRUMENT [l l l l ][r r r r ] to set the value.
Parameters common to all parts:
Use INSTRUMENT [l l l l ][r r r r ] to set the value.
Simultaneously press INSTRUMENT [l l l l ] and [r r r r ], and the data will be
transmitted.
A display of "
* Be aware that the screen data will not be transmitted from MIDI OUT connector if MIDI
OUT/THRU Select (p.136) is set to THRU.
Simultaneously press PART [l l l l ] and [r r r r ] to end the procedure.
1
2
PART
ALL
LEVEL
MUTE
REVERB
SC - 55
MAP
3
KEY SHIFT
SC - 88
MAP
DELAY
Chapter 5. Convenient functions
" will appear while the data is being transmitted.
4
Part Parameters
6
4
Parameters common to all Parts
INSTRUMENT
5
PAN
CHORUS
MIDI CH