Roland SoundCanvas SC-88 Pro Owner's Manual page 71

Effects that modify the pitch (pitch shift
type)
29: 2 Pitch Shifter ( 2-voice pitch shifter)
A Pitch Shifter shifts the pitch of the original sound.
This 2-voice pitch shifter has two pitch shifters, and
can add two pitch shifted sounds to the original sound.
L
Pitch 1
Pitch 2
R
+Coarse 1 (Coarse pitch 1)
Adjust the pitch of Pitch Shift 1 in semitone steps (-
2 - +1 octaves).
Fine 1 (Fine pitch 1)
Make fine adjustments to the pitch of Pitch Shift 1 in
2-cent steps (-100 - +100 cents).
Pre Dly 1 (Pre delay time 1)
Adjust the time delay from when the direct sound
begins until the Pitch Shift 1 sound is heard.
EFX Pan 1 (Effect output pan 1) L63 - 0 - R63 [4]
Adjust the stereo location of the Pitch Shift 1 sound.
L63 is far left, 0 is center, and R63 is far right.
#Coarse 2 (Coarse pitch 2)
Adjust the pitch of Pitch Shift 2 in semitone steps (-
2 - +1 octaves).
Fine 2 (Fine pitch 2)
Make fine adjustments to the pitch of Pitch Shift 2 in
2-cent steps (-100 - +100 cents).
Pre Dly 2 (Pre delay time 2)
Adjust the time delay from when the direct sound
begins until the Pitch Shift 2 sound is heard.
EFX Pan 2 (Effect output pan 2) L63 - 0 - R63 [8]
Adjust the stereo location of the Pitch Shift 2 sound.
L63 is far left, 0 is center, and R63 is far right.
Shift Mode (Pitch shifter mode)
Higher settings of this parameter will result in slow-
er response, but steadier pitch.
L.Bal (Level balance )
Adjust the volume balance between the Pitch Shift
1 and Pitch Shift 2 sounds.
Balance (Effect balance )
Adjust the volume balance between the direct and
the processed sound.
"D" or "E" on the display respectively means
D(direct sound) or E(effect sound) values of 100.
[01H, 60H]
EQ
Pan
Balance
Pan
EQ
-24 - 0 - +12 [1]
-100 - 0 - +100 [2]
0 - 100m [3]
-24 - 0 - +12 [5]
-100 - 0 - +100 [6]
0 - 100m [7]
1 - 5 [9]
A> 0B - A 0<B [10]
D> 0E - D 0<E [16]
Chapter 4. Insertion Effects
Low Gain
Adjust the gain of the low frequency range.
Hi Gain (High gain )
Adjust the gain of the high frequency range.
Level (Output level )
Adjust the output level.
30: Fb P.Shifter (Feedback pitch shifter)
This pitch shifter allows the pitch shifted sound to be
returned into the effect.
L
Pitch
R
+P.Coarse (Coarse pitch )
Adjust the pitch of the pitch shifted sound in semi-
tone steps (-2 - +1 octaves).
P.Fine (Fine pitch )
Make fine adjustments to the pitch of the pitch shift-
ed sound in 2-cent steps (-100 - +100 cents).
#Feedback (Feedback level )
Adjust the proportion (%) of the processed sound
that is fed back into the effect. Negative (-) settings
will invert the phase.
Pre Dly (Pre delay time )
Adjust the time delay from when the direct sound
begins until the pitch shifted sound is heard.
Mode (Pitch shifter mode )
Higher settings of this parameter will result in slow-
er response, but steadier pitch.
EFX Pan (Effect output pan )
Adjust the stereo location of the pitch shifted sound.
L63 is far left, 0 is center, and R63 is far right.
Balance (Effect balance )
Adjust the volume balance between the direct and
the processed sound.
"D" or "E" on the display respectively means
D(direct sound) or E(effect sound) values of 100.
Low Gain
Adjust the gain of the low frequency range.
Hi Gain (High gain )
Adjust the gain of the high frequency range.
Level (Output level )
Adjust the output level.
-12 - +12 [17]
-12 - +12 [18]
0 - 127 [20]
[01H, 61H]
EQ
Balance
Pan
EQ
-24 - 0 - +12 [1]
-100 - 0 - +100 [2]
-98% - +98% [3]
0 - 100m [4]
1 - 5 [5]
L63 - 0 - R63 [6]
D> 0E - D 0<E [16]
-12 - +12 [17]
-12 - +12 [18]
0 - 127 [20]
69