Setting Parameters Common To All Parts; Procedure - Roland SoundCanvas SC-88 Pro Owner's Manual

Setting parameters common to all Parts

Procedure

1.
2.
3.
34
Here's how to make settings for parameters that are common to all Parts.
This procedure allows you to set the following parameters.
LEVEL [l] [r] : set the volume of all Parts
PAN [l] [r] : set the pan of all Parts
KEY SHIFT [l] [r] : transpose all Parts
[MUTE] : mute all Parts (All Mute)
[SC-55 MAP] : Set all Parts to the SC-55 map.
[SC-88 MAP] : Set all Parts to the same sound map structure as the SC-88.
Make sure that the [ALL] indicator is lit.
If it is dark, press the [ALL] button to turn it on.
* If you wish to make settings independently for each Part, press the [ALL] button to turn off the
indicator, and use the following procedure. (p.25)
Use the front panel parameter buttons to make settings.
With the LEVEL, PAN and KEY SHIFT buttons, you can simultaneously
press both [l l l l ] [r r r r ] buttons to graphically display the current setting on
the screen. If you simultaneously press them once again, the previous
screen will reappear.
ALL
MUTE
Set all Parts to
SC - 55
the SC-55 map.
MAP
SC - 88
MAP
Set all Parts to
Mute all Parts
the same sound
map structure
as the SC-88.
Chapter 2. Parts and paramters
1
Set the volume of all Parts
PART INSTRUMENT
LEVEL
REVERB CHORUS
KEY SHIFT MIDI CH
DELAY
Transpose all Parts
PAN
Set the pan of all Parts