Creating And Saving A Patch(User Patch) - Roland SoundCanvas SC-88 Pro Owner's Manual

Creating and saving a Patch (User Patch)
Naming a User Patch
1.
2.
3.
4.
5.
6.
100
You can modify the parameter values of Parts A01 and A02 as desired, assign a Patch
name, and save it. A Patch saved in this way is referred to as a User Patch. 16 Patches
can be saved in the Patch number locations U01 - U16.
Load
Default Setting
Patch
Patch Name :
Parameters common to all Parts
Part B16
Default
Part A01 Value
Default
Value
* All Patch parameters (p.194) are stored. (List of parameters and procedures, p.150)
However, a distinction between GroupA and B of MIDI channels will not be stored. The MIDI
channel will be saved as channel "A**" of Group A
* Drum set parameters are not stored in a Patch.
Press the [ALL] button to make the button indicator light, and use
INSTRUMENT [l l l l ][r r r r ] to select the Patch whose name you wish to modify.
Press [ALL] to load Patch.
To cancel without loading, press [MUTE].
Simultaneously press PAN [r r r r ] and CHORUS [r r r r ].
The specified character location will blink.
PART INSTRUMENT
LEVEL PAN
Use PART [l l l l ][r r r r ] to move the selected character location.
The blinking area will move.
Press INSTRUMENT [l l l l ][r r r r ] and the displayed character will change.
Select the desired character, and return to step 4.
Each time you press [ALL], the character will change case as
Pressing [MUTE] will select a space.
Pressing [SC-55MAP] will select 0.
Each time you press [SC-88MAP], the symbol will alternate
Simultaneously press PAN [r r r r ] and CHORUS [r r r r ] to end the procedure.
* To save the User Patch name, perform the procedure of "Saving a User Patch."
Chapter 5. Convenient functions
Write
Patch U01
Patch 128
Parameters common to all Parts
Patch 001 Patch Name :
Part B16
Part A02
Part A01
Part A03
Instrument
Default
Effect
Value
Part Parameter etc.
Patch U16
Patch Name : -
Part B16
Patch Name :
Patch Name :
PartB16
Part A03
Default
Value
.
.