Part Parameters For Sound Editing; Procedure - Roland SoundCanvas SC-88 Pro Owner's Manual

Part parameters for sound editing

Procedure

1.
2.
3.
4.
On this unit, you can modify the values of a variety of parameters in order to create
the sound most suitable for your playing. A "parameter" is something that affects the
sound. The process of modifying parameter values is called "editing." Sound parameters
affect the volume, timbre and pitch of the sound.
You can set the following parameters.
Vibrato : Rate
Filter :
Envelope : Attack Time
Make sure that the [ALL] indicator is dark.
If it is lit, press the [ALL] button to turn it off.
Use the PART [l l l l ] [r r r r ] buttons to select a Part.
Press the [SELECT] button to select the parameter (vibrato, filter, enve-
lope) you wish to edit, and use the corresponding set of [l l l l ] [r r r r ] buttons
to modify the value.
Simultaneously pressing both [l l l l ] [r r r r ] buttons used to set Vibrato, Filter
or Envelope will cause the setting status of that parameter to appear
graphically in the display.
Simultaneously press both buttons again, and the previous display will reappear.
USER
INST SELECT
EFX ON/OFF
3
Chapter 2. Parts and paramters
Depth
Cutoff Frequency
Decay Time
2
1
PART
ALL
LEVEL
MUTE
REVERB
SC - 55
MAP
KEY SHIFT
SC - 88
MAP
DELAY
VIB RATE VIB DEPTH
CUTOFF
ATTACK DECAY
EFX TYPE EFX PARAM
Vibrato Vibrato
Rate Depth
Filter
Cutooff
Frequency
Envelope Envelope
Attack Time Decay Time
Delay
Resonance
Release Time
INSTRUMENT
PAN
CHORUS
MIDI CH
VIB DELAY
RESONANCE
RELEASE
4
EFX VALUE
Vibrato
Delay
Filter
Resonance
Envelope
Release Time
31