Roland SoundCanvas SC-88 Pro Owner's Manual page 21

To select the same sounds as the SC-55/SC-55mk II
4-1.
To select the same sounds as the SC-88
4-2.
Press [SC-55 MAP], and the sound for that Part will be almost the same as
the SC-55/55mk II.
At this time " " will be displayed in front of that Instrument name.
PART INSTRUMENT
LEVEL PAN
* It is also possible to select the CM-64 Instrument layout. (p.114)
Press [SC-88 MAP], and the sound for that Part will be the same as the
SC-88.
At this time " " will be displayed in front of that Instrument name.
INSTRUMENT
PART
LEVEL
PAN
ALL
MUTE
4-1 SC - 55
MAP
SC - 88
4-2
MAP
* To select Part sounds or Drum Sets from another MIDI device, refer to p.126.
* Some of the sounds in this unit cannot be played above (or below) a certain pitch. This is
because the sounds have been created with the pitch ranges of actual instruments in mind.
* You can edit sounds to suit your taste and store them as User sounds. (p.96)
Chapter 2. Parts and paramters
PART INSTRUMENT
LEVEL PAN
REVERB CHORUS
KEY SHIFT MIDI CH
DELAY
19