Saving A Drum Set You Created (User Drum) - Roland SoundCanvas SC-88 Pro Owner's Manual

Saving a Drum Set you created (User Drum)

Naming a User Drum Set
1.
2.
3.
4.
5.
102
You can modify drum instrument parameters to your liking, and save this data as a
Drum Set. A Drum Set saved in this way is called a User Drum Set. You can save up to
two Drum Sets, and since each set contains 128 instrumental sounds, this provides a
total of 256 instrumental sounds (Drum Instruments). You can also give each User Drum
Set a name of your choice. User Drum Sets are stored in Drum Set numbers 65 and 66
of the Native map / SC-88 map (p.104).
* The same contents are stored in both the SC-88 and Native maps.
Make sure that the [ALL] indicator is dark.
If it is lit, press [ALL] to turn it off.
Use PART [l l l l ] [r r r r ] to select a Drum Part, simultaneously press PAN [r r r r ]
and CHORUS [r r r r ].
The character at the cursor location will blink.
PART INSTRUMENT
LEVEL PAN
Use PART [l l l l ] [r r r r ] to move the cursor where you wish to input a character.
The blinking area will move.
Use INSTRUMENT [l l l l ] [r r r r ] to select the desired character.
3
Then repeat from step .
Each time you press [ALL], the character will change
Pressing [MUTE] will enter a space.
Pressing [SC-55 MAP] will select 0.
Each time you press [SC-88 MAP], the symbol will change
If you wish to change the User Drum Set number, simultaneously press both INSTRU-
MENT [l] and[r] buttons, and then use INSTRUMENT [l] [r] to select the number.
However, be aware that if you change the number, the parameter settings will also
change.
PART INSTRUMENT
LEVEL PAN
Simultaneously press PAN [r r r r ] and CHORUS [r r r r ] to end the procedure.
* To store the name of the User Drum Set in memory, follow the steps explained in "Storing an
entire Drum Set (procedure 2)" on p.103, 105.
1 3
PART
ALL
LEVEL
MUTE
REVERB
SC - 55
MAP
KEY SHIFT
SC - 88
MAP
DELAY
Chapter 5. Convenient functions
INSTRUMENT
4
PAN
2 5
CHORUS
MIDI CH
.
.