Playing Multiple Sounds Simultaneously (Performance Mode); Selecting A Performance; Selecting A Part And Specifying Its Sound - Roland XPS-10 Owner's Manual

Playing the XPS-10
Playing Multiple Sounds Simultaneously
(PERFORMANCE MODE)
The [PERFORM] button is lit if you turn on a function that lets you play
multiple sounds simultaneously, such as Dual or Split (p. 14).
If you've edited the Dual or Split settings (such as the sounds that are used),
you can save the edited settings in [PERFORM] button numbers 501
through 628 (p. 27).
The [PERFORM] button also provides preset settings that let you play
multiple sounds (A setting that lets you play multiple sounds is called a
"performance").
If you press the [PERFORM] button, the name of the performance appears
in the upper line of the screen.

Selecting a Performance

1.
Press the [PERFORM] button to make it light; the XPS-10 is
in Performance mode.
001:Bass / Piano
L Bs085 U Pf001
2.
Move the cursor to the performance number, and select a
performance.
Selecting the performance number
1.
Press the VALUE [-] [+] buttons.
The performance before or after the currently selected performance is
selected.
MEMO
. You can also use the NUMERIC function to select a performance. For
details, refer to "Entering Numeric Values" (p. 12).
. User performances are shown after the preset performances. You can
press the [PERFORM] button once again to switch between viewing
user and preset performances.
18

Selecting a Part and Specifying Its Sound

A performance contains 16 parts which you can use to play different
sounds simultaneously.
Here's how to switch between parts and assign a patch (or drum kit) to
each part.
1.
Press the [PERFORM] button to make it light; the XPS-10 is
in Performance mode.
If split or dual are on
Split
001:Bass / Piano
L Bs085 U Pf001
Dual
001: Bass / Piano
2 Bs085 1 Pf001
1.
Move the cursor to Lower (part 2) or Upper (part 1) and
use the tone buttons or the VALUE [-] [+] buttons to switch
sounds.
If split and dual are off
16-part mode
003:GrandStrings
Part 1 St001
1.
Move the cursor to Part and use the VALUE [-] [+] buttons
to select a part.
2.
Move the cursor to the tone number, and use the VALUE
[-] [+] buttons or tone buttons to select a patch (or drum
kit) for that part.
You can also use the NUMERIC function to specify a patch numerically.