Editing A Tone (Tone Edit); Editing A Tone (Tone Edit Screen); Editing Basic Settings For The Tone (Tone Common Edit); Editing The Parameters Of Each Section (Tone Edit) - Roland Jupiter-Xm Reference Manual

Editing a Tone
In addition to applying effects that modify the sound, the JUPITER-Xm lets
you use a variety of controllers to edit the tone itself.
Tone
Filter type = VCF
HPF
Filter type = TVF
OSC
Pitch Env
Pitch information for the key you play is sent to the oscillator, and is output
as sound via the mixer, filter, and amp etc.
The change produced by each section can be modified using an LFO or
envelope.
Editing a Tone
(TONE EDIT Screen)
From the MODEL BANK TOP screen, you can also use the
buttons to move to the pages at the right, and edit the tone from the tone
edit pages.
* You can also access the tone edit pages from the MENU screen.
&
"Accessing the MENU Screen"
1 .
Press the [MODEL BANK]
The MODEL BANK screen appears.
2 .
Press one or more of the
select the partial(s) that you want to edit .
By pressing two or more of the
select multiple partials to edit together.
MEMO
Only some models allow multiple selection.
3 .
Press the [SCENE] button .
The SCENE TOP screen appears.
4 .
Use the PAGE [<] [>] buttons
of the item that you want to edit .
5 .
Use the [1] knob to select the parameter that you want to
edit, and use the [2] knob
For details, refer to "Parameter Guide"
6 .
If you want to save the settings, write the tone .
&
"Saving the Tone Settings (TONE WRITE)"
Editing Basic Settings for the Tone
(TONE COMMON EDIT)
Here's how to make basic settings for the tone, such as its volume, pitch,
and whether various functions are used.
In this page you can edit parameters that are common to all partials.
Editing the Parameters of Each Section
(TONE EDIT)
Here you can edit the parameters of each section, such as the oscillator and
filter.
Depending on the model, the screens are divided into PARTIAL 1–4.
(TONE EDIT)
VCF
TVF 3Band EQ TVA PAN
#
L R
LFO 1/2
PAGE [<] [>]
(p. 41)
button .
OSC SELECT [1]–[4] buttons
[1]–[4] buttons simultaneously, you can
to move to the tone edit page
to edit the value .
(PDF).
(p. 25)
Editing the Effects
You can edit the effects for each tone.
This is valid if the "SCENE PART MFX"
that parameter is "OFF, "
This is recommended if you want to make effect settings individually for
each user tone.
&
"Part Edit" (p. 24)

Duplicating a Partial

For models such as
be edited, you can copy the parameters of the currently selected partial to
another partial.
MEMO
Be aware that an overwrite-saved tone cannot be restored to its
previous state.
1 .
From the MODEL BANK screen or the MENU screen, access
the "TONE EDIT"
&
"Accessing the MENU Screen"
2 .
Press the [FUNCTION]
You enter function mode.
3 .
Press one of the
partial .
4 .
While holding down the
button, press one of the
destination partial .
to
A confirmation message appears.
If you decide to cancel, press the
5 .
To execute, press the

Saving the Tone Settings

A tone that you create will change if you move a knob or select another
tone. It also disappears when you power-off the JUPITER-Xm. When you've
created a tone that you like, you should save it as a user tone.
1 .
Press the [SCENE]
button .
The WRITE MENU screen appears.
2 .
Use the [1] knob
the number of the part that is assigned to the tone that you
want to save), and press the
3 .
Use the [1] knob
destination, and press the
If you want to rename the tone that you're saving, use the
[>] buttons to move the cursor and use the
character.
4 .
Press the [ENTER]
A confirmation message appears.
If you decide to cancel, press the
5 .
To execute, press the
(TONE MFX)
parameter "FllwToneMFX"
the part effect is used instead of the tone effect.

(PARTIAL COPY)

"XV-5080" or "RD-PIANO" which allow each partial to
screen .
(p. 41)
button .
[1]–[4] buttons to select the copy-source
[SHIFT] button
[1]–[4] buttons
[EXIT] button.
[ENTER] button .

(TONE WRITE)

button, and then press the
or the [2] knob to select
[ENTER] button .
or the [2] knob to select the save-
[ENTER] button .
[2] knob
button .
[EXIT] button.
[ENTER] button .
is "ON"; if
and the [WRITE]
to select the copy-
[WRITE]
"PART* TONE"(* is
PAGE [<]
to specify the
25