Chapter 8. Saving Your Settings; Saving Tone / Drum Set / Performance; Assigning A Name - Roland RS-5 Owner's Manual

Chapter 8. Saving Your Settings

Saving Tone / Drum Set /
Performance
When the Tone settings are changed, the "." in the lower
right of the LED display lights up, indicating that the settings
for the selected Tone, Drum Set, or Performance have been
changed.
fig.R08-01exp
When Tone settings are changed
When Drum Set settings are changed
When Performance settings are changed
If you select a different Tone, Drum Set, or Performance
while the dot is lit, the current settings are deleted. If there
are any settings you want to retain, save them to the User
Memory.
* You can also save Tone, Drum Set, and Performance settings
to an external sequencer (p. 115).

Assigning a name

Changing the name before saving is a convenient way to
allow you to distinguish different settings.
1. Select the Tone, Drum Set or Performance whose name
you want to change (p. 23, 26, 29, 30, 56).
* When changing Tone or Drum Set names, if Key Mode is set
to Split or Dual, press PART [
whose Tone or Drum Set is to be edited.
Example: Upper can be edited
fig.R08-02
2. Press [EDIT], getting the indicator to light.
3. Use VALUE [-]/[+] to select "Tone/Drum/
PFMCommon."
4. Press [ENTER].
]/[ ] to select the Part
5. When a Tone is being edited, press numeric key [1]
several times to select "Tone Name." When a Drum Set is
being edited, press numeric key [2] several times to select
"DrumSet Name." When a Performance is being edited,
press numeric key [3] to select "PERFORMANCE
Name."
fig.R08-03
* By holding down [SHIFT] and pressing [1] or [2], you will
return to the previous item.
6. Press [
]/[ ] to move the cursor to the name's
first character position.
7. Use VALUE [-]/[+] to set the value.
The following characters are available.
Value: space, A--Z, a--z, 0--9, ! " # $ % & ' ( ) * + , - . / : ; <
= > ? @ [ ¥ ] ^ _ ` { | }
8. Repeat steps 6–7 to input the name.
9. Press [EDIT].
The [EDIT] indicator goes out, and you are returned to
the previous screen.
When inputting characters, you can perform the
following operations conveniently by pressing
FAVORITE PERFORM BANK [1]– [8].
[1]: Displays a "." at the cursor position.
[2]: Displays a space at the cursor position.
[3]: Displays an "A" at the cursor position.
[4]: Displays an "a" at the cursor position.
[5]: Displays a "0" at the cursor position.
[6]: Converts capital and lowercase characters.
[7]: Inserts a space at the cursor position.
[8]: Deletes a character at the cursor position and moves
the following characters to the left.
113