Maintenance And Repair Work; Return Procedure - Siemens SITRANS P Compact Operating Instructions

Service and maintenance

7.5 Return procedure

7.4

Maintenance and repair work

Impermissible accessories and spare parts
Risk of explosion in areas subject to explosion hazard.
● Only use original accessories or original spare parts.
● Observe all relevant installation and safety instructions described in the instructions for the
NOTICE
Faulty measurement caused by dirt
The pressure transmitter can become soiled by the process medium.
● Prevent any dirt accumulating on the entry openings on the protective cover of the
7.5 Return procedure
Enclose the bill of lading, return document and decontamination certificate in a clear plastic
pouch and attach it firmly to the outside of the packaging.
Required forms
● Delivery note
● Return document (http://www.siemens.com/processinstrumentation/returngoodsnote)
with the following information:
– Product (item description)
– Number of returned devices/replacement parts
– Reason for returning the item(s)
● Decontamination declaration (http://www.siemens.com/sc/declarationofdecontamination)
With this declaration you warrant "that the device/replacement part has been carefully
cleaned and is free of residues. The device/replacement part does not pose a hazard for
humans and the environment."
If the returned device/replacement part has come into contact with poisonous, corrosive,
flammable or water-contaminating substances, you must thoroughly clean and
decontaminate the device/replacement part before returning it in order to ensure that all
hollow areas are free from hazardous substances. Check the item after it has been cleaned.
Any devices/replacement parts returned without a decontamination declaration will be
cleaned at your expense before further processing.
26
WARNING
device or enclosed with the accessory or spare part.
pressure transmitter.
SITRANS LH300 Transmitter for Hydrostatic Level
Compact Operating Instructions, 01/2019, A5E37897183-AC