Introduction
1.1
Purpose of this documentation
These instructions contain all information that you will require to commission and use the
device. Read these instructions carefully prior to installation and commissioning. In order to
use the device correctly, first make yourself acquainted with its principle of operation.
The instructions are aimed both at persons mechanically installing the device, connecting it
electronically, configuring the parameters and commissioning it as well as service and
maintenance engineers.
1.2
History
The following table shows the most important changes in the documentation compared to
each previous edition:
Edition
01
06/2006
02
06/2010
1.3
Notes on warranty
The contents of this programming manual shall not become part of or modify any prior or
existing agreement, commitment or legal relationship. All obligations on the part of Siemens
AG are contained in the respective sales contract, which also contains the complete and
solely applicable warranty conditions. Any statements on the device versions described in
the programming manual do not create new warranties or modify the existing warranty.
The content reflects the technical status at the time of printing. We reserve the right to make
technical changes in the course of further development.
See also
Contacts (http://www.siemens.com/processinstrumentation/contacts)
Product information on SITRANS T in the Internet (http://www.siemens.com/sitranst)
Instructions and Manuals (http://www.siemens.com/processinstrumentation/documentation)
SITRANS TH100
Operating Instructions, 06/2010, A5E00331168-02
Remark
First edition
Editorial revision as
regards content
Firmware identification
nameplate
FW: 01.01.00
FW: 01.01.00
System integration
TH100: SIPROM T V1.07
TH100: SIPROM T V1.07
1
5