Table of Contents
Advertisement
5.1.2
Proper mounting
NOTICE
Incorrect mounting
The device can be damaged, destroyed, or its functionality impaired through improper
mounting.
• Before installing ensure there is no visible damage to the device.
• Make sure that process connectors are clean, and suitable gaskets and glands are used.
• Mount the device using suitable tools. Refer to the information in Technical
5.1.2.1
Process connections
Process connections are available with three thread types:
• 2" NPT [(Taper), ASME B1.20.1]
• R 2" [(BSPT), EN 10226]
• G 2" [(BSPP), EN ISO 228-1]
NOTICE
Process connection type
The thread type can be found on the device process connection, defined by a letter in the
mold, near the end of the threads.
SITRANS Probe LU240 with mA/HART
Compact Operating Instructions, 09/2021, A5E42673704-AE
specifications (Page 47).
Installing/mounting
5.1 Basic safety notes
19
Advertisement
Table of Contents
