Storing Your Machine's Own Telephone Number; Storing Your Area Code Prefix - Ricoh FAX5600L Operator's Manual

NETWORKING

Storing your Machine's Own Telephone Number

Store your fax terminal's telephone number using this feature. If you do not do
this, you will not be able to use the Transfer Request feature.
If your fax machine's telephone number changes, do not forget to change the
stored telephone number data.
1.
Function 6 0 2
↓
6 1
2.
Yes
3. Input your fax terminal's telephone number.
The format of the number must be as follows:
International Dial Prefix, Your Country Code, Your Area Code, then you
must add a Pause, followed by your telephone number.
Check the International Dialing Prefix and the Country Code with your local
telecommunications operator. The example shown is for the USA; the
codes to add are 011 and 1.
NOTE: Use the
Pause
pause.
4.
Yes Function

Storing your Area Code Prefix

The Area Code Prefix is the digit that is added to area codes when you dial
another area within your own country. In many countries, this code is just a zero.
In Spain, a '9' is used, and in the USA, the setting is just left blank.
1.
Function 6 0 2
↓ ↓
6 1
84
2 2 2
OWN ANALOG NUMBER
YES
NO
OWN ANALOG NUMBER
_
key to add a
OWN ANALOG NUMBER
YES
0111212-5551234
2 2 2
AREA CODE PREFIX
YES
NO
ADVANCED FEATURES
TO SET PREVIOUS
TO CANCEL NEXT
TO END
YES
.
OR
CLR NO
_
TO SET PREVIOUS
TO CANCEL NEXT