Ricoh FAX5600L Operator's Manual page 27

Switch 04 - Various
Digit
0 Do not change these settings.
1
2 Auto reduce
3 Do not change these settings.
4
5 Restricted Access
Service Report Transmission
If this is set to 1, store your dealer's fax number in Quick Dial Key 63. Then, when
you need to order toner, use the procedure on page 227.
6 If you wish to use Quick Dial 63 for a number other than that of your dealer, set this
bit to 0. Quick Dial Key 63 can now be programmed in the same way as other Quick
Dial Keys. However, you will not be able to use the Service Report Transmission
feature.
Ordering Toner
If this is set to 1, store your dealer's fax number in Quick Dial Key 64. Then, when
you need to order toner, use the procedure on page 197.
7
If you wish to use Quick Dial 64 for a number other than that of your dealer, set this
bit to 0. Quick Dial Key 64 can now be programmed in the same way as other Quick
Dial Keys. However, you will not be able to use the Ordering Toner feature.
Switch 05 - Various
Digit
0 Substitute reception
Reverse order printing (Memory card or hard disk required)
1
2 Two in One
3 Memory reception if no RTI or CSI received
4 to 7 Do not change these settings.
Switches 06 and 07 - Do not use
HOW TO USE THIS MANUAL
Purpose
0: Off
0: Off
0: Disabled
0: Disabled 1: Enabled
Purpose
0: Off
0: Off
0: Off
0: Possible
1: On
1: On
1: Enabled
1: On
1: On
1: On
1: Not possible
13