Check Your Destinations Before Dialing - Ricoh FAX5600L Operator's Manual

SENDING A FAX MESSAGE
5.
Yes
Here, DEST: 2 indicates that the machine is
asking you to input the second telephone
number in your list of destinations for this fax
message.
6. Either
Dial another number: Go to step 4.
Press .
Start
The machine will dial the first destination (or, if you selected Send Later, it will
return to standby mode and the fax message will be sent at the time that you
selected).
NOTE: In theory, you can send the same fax message to up to 200 different
destinations using the above procedure. However, this number
depends on how many numbers are currently waiting in memory to be
dialed. See the table on page 43 for more information concerning the
limitations to this feature.

Check your Destinations Before Dialing

If you wish to send a fax message to more than one location, you can scroll
through the list of telephone numbers that you have input so far to check whether
you have missed any out or entered any wrong numbers.
This feature is useful when using features such as Broadcasting, Transfer
Request, and Polling Reception.
Cross-reference
Broadcasting: see page 51.
Polling Reception: see page 158.
↓
1. Press
0 8
The number after DEST
many numbers you have input so far.
↓
2. Use the arrow to scroll through the list of destinations that you have
already input.
To cancel a destination that you have input by mistake:
To finish checking:
52
MEMORY TRANS.
ENTER NO. OR
_
STORING
Transfer Request: see page 87.
CHECK DEST.
01 XYZ CO. NEW YORK
shows how
Yes
ROUTINE OPERATION
OPTIONS
DEST: 2
START
MEMORY 99%
PAGE 1
FILE NO. 0056
PRESS OR
YES
DEST.: 2
No
NO