Reception Time - Ricoh FAX5600L Operator's Manual

ADVANCED FEATURES

Reception Time

When you receive a message, the time is printed at the top of the page. However,
this is the time at the transmitting end. To check the local time, you have to print
the TCR.
However, if you switch on Reception Time, the local time is also printed on each
page that you receive. The time is taken from your machine's internal clock, and
is the same as the time that will be printed on the TCR. Switch this feature on if
you often receive fax messages from other countries.
Cross-references
TCR: see page 185.
To switch this feature on, do the following. (See page 10 if you need more
information about the User Parameter settings adjustment procedure).
1.
Function 6 0 2
2. The settings for switch 00 are now
shown on the bottom line of the display.
↓
3. Press until the settings for switch 01
are shown.
The setting that you need to change is
digit 2.
4. If you wish to change the setting, press
5. Finish:
Yes Function
Note: If the message is in the memory for a while (for example confidential re -
ception, memory lock or substitute reception), the printing time is printed
at the top of the page.
Date and Time: see page 24.
2 2 2 9 1
USER PARAMETER
DEFAULT:
SWITCH00:
.
2
RECEPTION
PRINT LIST
01000000
TO END
YES
01000000
Digit 2
0: The reception time will not be
printed.
1: The reception time will be printed.
149