Transfer Request - Ricoh FAX5600L Operator's Manual

ADVANCED FEATURES

Transfer Request

Transfer Request helps you save costs when you send the same message to
more than one place in a distant area.
Your machine sends the message to the Transfer Station, which holds it in
memory.
The Transfer Station then sends it on to each of the End Receivers in
sequence.
After broadcasting, the Transfer Station sends your machine a Transfer Result
Report to tell you if there were any problems with the communication.
Note: This feature can only be used if the Transfer Station was made by the
same maker as your machine.
The ID Code of your machine must be the same as the ID Code of the
Transfer Station.
Your fax machine's telephone number must have been programmed in
advance.
The Transfer Station must have memory space available, and must be
able to act as a Transfer Station (some machines cannot do this, or
can but the capability has been switched off).
You cannot dial the End Receivers as full numbers on your ten-key pad, and you
cannot use your own stored Speed Dials, Quick Dials, and Groups. You must use
the numbers that are stored in the Transfer Station. Always keep a copy of the
Transfer Station's Telephone Lists (Quick Dial, Speed Dial, and Group Lists) near
the machine if you plan to use Transfer Request.
Cross-reference
Quick Dial and Speed Dial: see pages 29 and 31.
ID Code: see page 85.
NETWORKING
Groups: see page 30.
Telephone Lists: see p. 192.
87