Terminal Identification - Ricoh FAX5600L Operator's Manual

← →
2. Use the and
scroll key to switch this feature on or off.
3. To store your setting:

Terminal Identification

There are three labels which identify yourself to the operator at the other end.
These labels are called the RTI, the TTI, and the CSI.
RTI (Remote Terminal Identification) and CSI (Called Subscriber
Identification): These appear at the other end in the display on the operation
panel during communication, and on reports after communication.
TTI (Transmit Terminal Identification): This is printed at the other end at the
top of each page received from your machine.
You can see the RTI, TTI, and CSI of the other party during the communication
(see the following diagram) and on reports printed by the machine later.
Some machines may reject your transmitted fax messages if you have not
stored the RTI, TTI, or CSI in advance.
Note: You can switch the TTI off for a particular transmission if you do not wish
it to be printed on your pages as they are printed at the other end. See
page 64.
BEFORE YOU SEND YOUR FIRST FAX
arrows on the
Yes
TTI
RTI or CSI
25