Displayed Error Messages - Ricoh FAX5600L Operator's Manual

SOLVING PROBLEMS

DISPLAYED ERROR MESSAGES

The following messages may appear while you are operating or programming the
machine.
CHECK AUTO-DIALING
NO BOOKING FOR POLLING
RECV
NO TRANS FILES EXIST
NO POLLING DOCUMENTS EXIST
THIS FILE DOES NOT EXIST
TOO MANY DEST
DOCUMENT IN USE
USED AS GROUP
USED AS PROGRAM
USED AS QUICK DIAL
NOT ADDED
NOT ADDED!
OVERFLOW
NOT PROGRAMMED
FAX NO NOT PROGRAMMED
NO DATA PROGRAMMED
ALREADY PROGRAMMED
You cannot use the auto-dialer at the moment. Use the ten-key
pad or the handset.
No polling reception operations have been programmed.
There are no messages in memory waiting for transmission.
There are no messages in memory waiting to be polled.
Incorrect file number. Check the file number and try again.
The memory cannot hold any more telephone numbers.
Either: Delete some numbers then try again.
Or: Wait until some of the Send Later or other delayed
transmissions waiting in memory have been carried out, then
try again.
This message is now being sent. You cannot print it now.
This Quick Dial Key has a Group stored in it.
This Quick Dial Key has a Keystroke Program stored in it.
This Quick Dial Key has a telephone number stored in it.
The telephone number was not stored, because either:
You cannot add any more numbers to this Group.
The digit, pause, or other symbol that you just attempted to
input was rejected because it is inappropriate.
The telephone number was not stored, because you cannot
store any more full telephone numbers at the moment.
Either: Delete some numbers from the machine to make room,
then try again.
Or: Store this number as a Quick or Speed Dial before trying to
use it.
Or: Wait until some of the Send Later or other delayed
transmissions waiting in memory have been carried out, then
try again.
There is no room in the machine's memory for any more
telephone numbers.
Either: Delete some numbers from the machine to make room,
then try again.
Or: Wait until some of the Send Later or other delayed
transmissions waiting in memory have been carried out, then
try again.
Either:
This Quick Dial Key or Speed Dial Code does not contain a
number.
This Quick Dial Key does not contain a Keystroke Program.
There are no fax numbers stored in this Group.
The Group that you tried to erase does not contain any fax
numbers.
Either:
This number is already included in this Group.
This RTI/CSI has already been stored for use with this feature.
DISPLAYED ERROR MESSAGES
223