Programming Procedure - Ricoh FAX5600L Operator's Manual

ADVANCED FEATURES

Programming Procedure

Example: For Tuesday, set the heater to switch on at 9 am and switch off at 6 pm.
1.
Function 6 0 2
7 4 Yes
↑
2. Use the and
through the days of the week.
↓
Example: Press
Tuesday.
3. Program the first timer for Tuesday:
Both timers for each day have an ON/OFF setting. "ON" means that the heater will switch
on at the time indicated. "OFF means that the heater will switch off at the time indicated.
To change the ON to OFF, or the other way round, press
When the ON/OFF display is correct:
Input the time: 0
Repeat step 3 for the second timer.
Input
0 6 0
To change AM to PM and the other
way around, press
KEEPING THE HEATER ON ALL DAY: Set both timers to ON = 12:00AM.
KEEPING THE HEATER OFF ALL DAY: Set both timers to OFF = 12:00AM.
4. Either:
Program the timer for another day: Go back to step 2.
Finish:
Yes Function
NOTE: To print the received messages while the heater is off, press any key. After all the
messages have been printed, the heater will stay on for 5 minutes before switching off again.
Because of this, the Power Saver does not give you complete security for received
documents. For this type of security, use the Memory Lock feature; see page 129.
2 2 2
POWER SAVER
(SUN)
↓
keys to scroll
twice to go to
POWER SAVER
(TUE)
→
(TUE) ON =
9 0 0
for the timer value .
0
.
#
POWER SAVER
(TUE)ON= 09:00AM OFF = 06:
DAY OF WK.
ON = 12:00AM ON = 12:00AM
DAY OF WK.
ON = 12:00AM ON = 12:00AM
.
*
POWER SAVER DAY OF WK.
12 :00AM ON = 12:00AM
DAY OF WK.
OTHER
TO END
YES
TO END
YES
TO END
YES
00 PM
TO END
YES
177