Enabling/Disabling The Display Of Copyright Information - 3Com S7906E Configuration Manual

Configuration
[1], 2, 3 and 1 or [1], 3, 2 and 1

Enabling/Disabling the Display of Copyright Information

With the display of copyright information enabled, the copyright information is displayed when a
user logs in through Telnet or SSH, or when a user quits user view after logging in to the device
through the console port or AUX port. The copyright information will not be displayed under other
circumstances. The display format of copyright information is as shown below:
******************************************************************************
* Copyright (c) 2004-2009 3Com Corp. and its licensors. All rights reserved. *
* This software is protected by copyright law and international treaties.
* Without the prior written permission of 3Com Corporation and its licensors,*
* any reproduction republication, redistribution, decompiling, reverse
* engineering is strictly prohibited. Any unauthorized use of this software
* or any portion of it may result in severe civil and criminal penalties, and*
* will be prosecuted to the maximum extent possible under the applicable law.*
******************************************************************************
With the display of copyright information disabled, under no circumstances will the copyright
information be displayed.
Follow these steps to enable/disable the display of copyright information:
To do...
Enter system view
Enable the display of copyright
information
Disable the display of copyright
information
System clock displayed by
the display clock command
If date-time is not in the daylight
saving time range, date-time is
displayed.
date-time is in the daylight
saving time range:
If the value of
"date-time"-"summer-offset" is
not in the summer-time range,
"date-time"-"summer-offset" is
displayed;
If the value of
"date-time"-"summer-offset" is
in the summer-time range,
date-time is displayed.
Use the command...
system-view
copyright-info enable
undo copyright-info enable
1-6
Example
Configure: clock timezone
zone-time add 1, clock
summer-time ss one-off 1:00
2008/1/1 1:00 2008/8/8 2 and
clock datetime 1:30 2008/1/1
Display: 23:30:00 zone-time
Mon 12/31/2007
Configure: clock timezone
zone-time add 1, clock
summer-time ss one-off 1:00
2008/1/1 1:00 2008/8/8 2 and
clock datetime 3:00 2008/1/1
Display: 03:00:00 ss Tue
01/01/2008
*
*
*
Remarks
—
Optional
Enabled by default.
Required
Enabled by default.