July 2005
REV C
A-1
Perform Pre-operation
Inspection
Completing a Pre-operation Inspection is essential
to safe machine operation. The Pre-operation
Inspection is a visual inspection performed by the
operator prior to each work shift. The inspection is
designed to discover if anything is apparently wrong
with a machine before the operator performs the
function tests. The Pre-operation Inspection also
serves to determine if routine maintenance
procedures are required.
Complete information to perform this procedure is
available in the Genie S-60 and Genie S-65
Operator's Manual on your machine.
Part No. 77828
Section 3 • Scheduled Maintenance Procedures
Checklist A Procedures
A-2
Perform Function Tests
Completing the function tests is essential to safe
machine operation. Function tests are designed to
discover any malfunctions before the machine is
put into service. A malfunctioning machine must
never be used. If malfunctions are discovered, the
machine must be tagged and removed from
service.
Complete information to perform this procedure is
available in the Genie S-60 and Genie S-65
Operator's Manual on your machine.
S-60 • S-65
3 - 7