Checklist A Procedures; Perform Pre-Operation Inspection; Perform Function Tests - Genie Z-30/20N Service Manual

Section 3 • Scheduled Maintenance Procedures

Checklist A Procedures

A-1

Perform Pre-operation Inspection

Completing a pre-operation inspection is essential
to safe machine operation. The pre-operation
inspection is a visual inspection performed by the
operator prior to each work shift. The inspection is
designed to discover if anything is apparently
wrong with a machine before the operator performs
the function tests. The pre-operation inspection
also serves to determine if routine maintenance
procedures are required.
Complete information to perform this procedure is
available in the Genie Z-30/20N Operator's Manual
on your machine.
3 - 6
A-2

Perform Function Tests

Completing the function tests is essential to safe
machine operation. Function tests are designed to
discover any malfunctions before the machine is
put into service. A malfunctioning machine must
never be used. If malfunctions are discovered, the
machine must be tagged and removed from
service.
Complete information to perform this procedure is
available in the Genie Z-30/20N Operator's
Manual. Refer to the Operator's Manual on your
machine.
Genie Z-30/20N
April 2005
REV B
Part No. 106373