Table 21: Ac Power Cord Specifications - Juniper ACX2200 Hardware Manual

ACX2200 Universal Access Router Hardware Guide

Table 21: AC Power Cord Specifications

Country Model Number
Australia CBL-GP-C15-AU
China CBL-GP-C15-CH
Europe (except Italy, CBL-GP-C15-EU
Switzerland, and
United Kingdom)
Italy CBL-GP-C15-IT
Japan CBL-GP-C15-JP
Korea CBL-GP-C15-KR
Switzerland CBL-GP-C15-SZ
North America CBL-GP-C15-US
United Kingdom CBL-GP-C15-UK
44
You can order detachable AC power cords, each approximately 8 ft (2.5 m) long that
supply AC power to the router. The C15 appliance coupler at the female end of the cord,
as described by International Electrotechnical Commission (IEC) standard 60320, inserts
into the AC appliance inlet coupler. The plug at the male end of the power cord fits into
the power source receptacle that is standard for your geographic location.
Table 21 on page 44 provides specifications on the AC power cord provided for each
country or region.
Electrical Specification
250 VAC, 10 A, 50 Hz
250 VAC, 10 A, 50 Hz
250 VAC, 10 A, 50 Hz
250 VAC, 10 A, 50 Hz
125 VAC, 15 A, 50 Hz or 60 Hz
250 VAC, 10 A, 50 Hz
250 VAC, 10 A, 50 Hz
125 VAC, 13 A, 60 Hz
250 VAC, 10 A, 50 Hz
WARNING: The AC power cord for the router is intended for use with the
router only and not for any other use.
WARNING: The attached power cable is only for this product. Do not use the
cable for another product. Translation in Japanese follows:
Plug Type Design Standard
SAA/3 AS/NZZS 3112-2000
PRC/3 GB2099, GB1002
VIIG CEE (7) VII
I/3G CEI 23-16
498GJ JIS 8303
VIIG CEE (7) VII
12G SEV 1011 / 6534-2
498G NEMA 5-15
BS89/13 BS 1363/A
Copyright © 2017, Juniper Networks, Inc.