Chassis Components And Descriptions; Front Panel Of An Acx2200 Router - Juniper ACX2200 Hardware Manual

CHAPTER 2

Chassis Components and Descriptions

Front Panel of an ACX2200 Router

Copyright © 2017, Juniper Networks, Inc.
Front Panel of an ACX2200 Router on page 13
LEDs on ACX2200 Routers on page 15
Uplink Ports on ACX2200 Routers on page 16
Alarm Contact Port on the ACX2200 Router on page 18
Clocking Ports on the ACX2200 Router on page 20
The front panel of an ACX2200 router consists of the following components (see
Figure 7 on page 14 and Figure 6 on page
Chassis status LED labeled
Two USB ports for upgrading Junos OS
Management Ethernet port labeled
Console or auxiliary port labeled
Alarm contact port labeled
External clocking input port labeled
External clocking ports supporting
Network ports and corresponding status LEDs:
Four Gigabit Ethernet RJ-45 ports labeled
Four combination ports (
or four Gigabit Ethernet SFP ports, labeled
Two Gigabit Ethernet (
transceivers
Two 10-Gigabit Ethernet (
transceivers
14):
SYS
MGMT
CONSOLE/AUX
ALARM —accepts a DE-15 alarm cable
EXT REF CLK IN
1PPS and 10MHz
0/0/0
COMBO PORTS ): either four Gigabit Ethernet RJ-45 ports
0/1/0
GE ) SFP ports, labeled 0/2/0
) ports, labeled
XE 0/3/0
input and output
through
0/0/3
through .
0/1/3
and 0/2/1 , that accept
and , that accept SFP+
0/3/1
13