Table of Contents
Advertisement
Related
Documentation
Copyright © 2017, Juniper Networks, Inc.
Remove the rubber safety cap from the transceiver and the end of the cable. Insert
7.
the cable into the transceiver.
WARNING:
Do not look directly into a fiber-optic transceiver or into the
ends of fiber-optic cables. Fiber-optic transceivers and fiber-optic cable
connected to a transceiver emit laser light that can damage your eyes.
Verify that the status LEDs on the front panel indicate that the transceiver is functioning
8.
correctly. For more information about the component LEDs, see
Routers" on page
15.
Front Panel of an ACX2200 Router on page 13
Uplink Ports on ACX2200 Routers on page 16
Maintaining Cables That Connect to ACX2200 Network Ports on page 91
Chapter 21: Replacing Chassis Components
"LEDs on ACX2200
101
Advertisement
Table of Contents
Troubleshooting
