Table of Contents
Advertisement
CHAPTER 15
Installing the Router
Installing the ACX2200 Mounting Brackets
Copyright © 2017, Juniper Networks, Inc.
Installing the ACX2200 Mounting Brackets on page 69
Installing the ACX2200 Router in the Rack on page 70
To attach the mounting brackets, you need the following tools:
Phillips (+) screwdriver, number 2
Two mounting brackets for front or rear mounting ship with the router (see
Figure 14 on page 69
and
Figure 15 on page
To attach both mounting brackets to either the front or rear of the chassis:
Align the bracket with the two sets of mounting holes.
1.
Insert the four screws at the top and bottom of the bracket, and tighten each partially.
2.
Tighten the four screws completely.
3.
Repeat the procedure for the other bracket.
4.
Figure 14: Installing the Mounting Brackets to the Front of the ACX2200
Router
70).
69
Advertisement
Table of Contents
Troubleshooting
