Related
Documentation
Guidelines for Packing Hardware Components for Shipment
Related
Documentation
Copyright © 2017, Juniper Networks, Inc.
Place the router in the shipping container.
9.
Cover the router with an ESD bag and place the packing foam on top of and around
10.
the router.
Replace the accessory box on top of the packing foam.
11.
Securely tape the box closed.
12.
Write the RMA number on the exterior of the box to ensure proper tracking.
13.
Returning a Hardware Component to Juniper Networks, Inc. on page 115
Contacting Customer Support on page 111
To pack and ship individual components:
When you return components, make sure they are adequately protected with packing
materials and packed so that the pieces are prevented from moving around inside the
carton.
Use the original shipping materials if they are available.
Place individual components in antistatic bags.
Write the RMA number on the exterior of the box to ensure proper tracking.
CAUTION:
Do not stack any of the hardware components.
Returning a Hardware Component to Juniper Networks, Inc. on page 115
Contacting Customer Support on page 111
Chapter 25: Packing and Returning Components
117