Power Specifications; Acx2200 Ac Power Specifications; Acx2200 Ac Power Cord Specifications; Table 20: Ac Power System Electrical Specifications - Juniper ACX2200 Hardware Manual

CHAPTER 10

Power Specifications

ACX2200 AC Power Specifications

ACX2200 AC Power Cord Specifications

Copyright © 2017, Juniper Networks, Inc.
ACX2200 AC Power Specifications on page 43
ACX2200 AC Power Cord Specifications on page 43
ACX2200 DC Power Specifications on page 45
ACX2200 Router Grounding Specifications on page 46
Table 20 on page 43 lists the AC power system electrical specifications.

Table 20: AC Power System Electrical Specifications

Item
AC input voltage
AC input line frequency
AC system current rating
AC system input power
AC power supply
NOTE: We recommend that you use a dedicated customer site circuit breaker
rated for 2 A (100 VAC) or 1 A (240 VAC), or as required by local code. Doing
so enables you to operate the router in any configuration without upgrading
the power infrastructure.
Each AC power supply has a single AC appliance inlet that requires a dedicated AC power
feed. Most sites distribute power through a main conduit that leads to frame-mounted
power distribution panels, one of which can be located at the top of the rack that houses
the router. An AC power cord connects each power supply to the power distribution panel.
Specification
Operating range: 100 to 240 VAC
50 to 60 Hz (nominal)
2 A (100 VAC) or 1 A (240 VAC)
85 W Maximum
70 W output
43