Channel Setting - YASKAWA DX200 Instructions Manual

165467-1CD
Pendant Oscilloscope
Function

4.3.1 Channel Setting

4.3.2 Adjustment of Acquisition Time of Job Name and Step No.
4 Other Functions
4.3 Job Step No. Saving Function
Only one control group can be specified at one measurement time as the
control group which is targeted to acquire the job name and the step No.
The setting can be performed in Channel Setting screen of the PP
oscilloscope (Fig. 4-5).
When the job including a control group which is set in this item works, the
job name and the step No. are saved.
Fig. 4-5: Adding Items to "ControlGroup" of Channel Setting Screen
When the job cursor reaches END or when the other job is called (when
the assignment of the job name and the step No. to the targeted control
group are stopped), the job name and the step No. which are output lastly
can be kept recording for a certain time.
This can be performed when assignment of the job name and the step No.
are interrupted because of the deviation of the waveform against the
instruction.
S4C1039 can adjust this addition time (unit: msec, default value: 500 msec).
Fig. 4-6: Example for Acquisition Time of Job Name and Step No.
CH2, Speed FB
4-7
Range that job names and step Nos. are generally added
Additional time for acquiring
job names and step Nos.
CH1, Signal for indicating
"under running"
CH3, Torque instruction
HW1481803
39 of 48