165467-1CD
Pendant Oscilloscope
Function
2.2.2 Main Screen (In-measurement Mode)
Name
{STOP} button
{CLEAR} button
{CLOSE} button
Condition setting panel
2
Setting and Operation for Data Measurement
2.2 Main Screen Configuration
Main screen of In-measurement mode is shown in Fig. 2-3. In this mode,
the states of some buttons are changed. Here describes such buttons;
Fig. 2-3: Main Screen (In-measurement Mode)
Function
Switched from the {START} button, stops the data measurement.
In measurement mode, the button operation is disabled.
In measurement mode, the button operation is disabled.
In measurement mode, the operation on tab is disabled.
Soon after switching the buttons {START} / {STOP}, button
operation is not available for a certain period of time to
NOTE
avoid continuous pressing of the buttons.
When the buttons {START} / {STOP} are disabled, wait until
the operation becomes available.
2-3
15 of 48
HW1481803