Csv File - YASKAWA DX200 Instructions Manual

165467-1CD
Pendant Oscilloscope
Function

3.1.2 CSV File

3 Saving and Loading the Measurement Data
3.1 SaveMode Setting Panel
The file is automatically given a file name consisting of the time, date and
the year when the save operation starts (yyymmdd_hhmmss.jpg).
The JPG file is saved in the root folder in the external CF or USB memory
of the pendant.
When both CF and USB memory are inserted, USB memory is given
priority for the data storage destination.
The CSV file contains the setting parameters shown in Table 3-1.
The CSV file can be used for file output of waveform data, as well as for
backup of the current setting status.
The setting parameters of TP oscilloscope are automatically
saved to the pendant when {OK} is pressed on the Channel
NOTE
Setting window or {CLOSE} on the Main screen.
However, at system software version-up, these parameters
are initialized. Use the CSV file for backup as necessary.
Table 3-1: Parameters to Save for CSV Files
Parameter
Sampling time
Timescale setting
(data length)
Channel setting
Channel display setting
Trigger setting
Waveform data
3-2
Description
As left
As left
Valid/Invalid
Target
Signal
Target axis
Zero point position
Reference unit
Display ON/OFF
Invert ON/OFF
Target channel
Trigger type
Trigger level
Pre-trigger
Alarm number
Valid/Invalid
Waveform data of available channel(s)
HW1481803
31 of 48