During Execution Of Zoom Function - YASKAWA DX200 Instructions Manual

Pendant Oscilloscope
Function

4.1.1 During Execution of Zoom Function

4 Other Functions
4.1 Zoom Function
 Width
Specify the size of zoom range by width, with the center position specified
in the Center. The width is shown in the waveform display area by a white
line.
In case the width of the range to be zoomed extended outside the
waveform display area, the center position is automatically adjusted so
that the width fits inside the range.
 {Zoom} button
Touching this button after setting of Center and Width zooms the specified
range.
When the Zoom function is performed, the currently displayed waveform
disappears, and the data in the zoom range is enlarged and displayed on
the waveform display area. Although the waveform before zoomed
temporarily disappears, it is retained inside the system; once canceling
the zoom function returns to the original state.
While the zoom function is performed, the {Zoom} button is switched to
the {ZoomCancel} button.
While the zoom function is performed, operations of the
{START} button and the {CH} button, and of the panels as
NOTE
tab switch setting become unavailable. To enable these
operations, touch the {ZoomCancel} button.
4-2
165467-1CD
HW1481803
34 of 48