YASKAWA DX200 Instructions Manual page 41

165467-1CD
Pendant Oscilloscope
Function


4 Other Functions
4.4 Operation Function by Dedicated Input
40761: Pendant Oscilloscope Starting Measurement
Starts measurement.
Rising
This signal performs the same operation as the operation when
pressing [START] of PP oscilloscope.
40762: Pendant Oscilloscope Saving CSV File
Saves the measured data to the CSV file.
Rising
This signal performs the same operation as the operation when
pressing [Save CSV] of PP oscilloscope.
The measurement start requesting signal (40761) and the
CSV file saving requesting signal (40762) are monitored
only when the signal acceptance ready (51172) is ON.
In order to accept the request surely, put a requesting signal
with the following procedure.
• After the signal acceptance ready (51172) is turned ON,
wait for 1 second, and then put the signal.
NOTE
• After putting the signal, ON status should be maintained for
1 second or longer.
4-9
41 of 48
HW1481803