YASKAWA DX200 Instructions Manual page 36

Pendant Oscilloscope
Function
4 Other Functions
4.2 Cursor Measurement Function
The cursor is displayed by a white broken line on the waveform display
area.
When there is no target channel data within the specified cursor range,
a part of the measurement parameters is not calculated. When this
happens, the result is shown in hyphens ("-").

CursorMode
When pressing [SHIFT] key + Cursor with {Zoom} tab opened, the
center position may move 0.05[div] to right and left. And when keep
pressing [SHIFT] key + Cursor, the position may move at high
speed.
When Horizontal cursor type is selected at
moves horizontally, and it moves vertically when Vertical cursor type is
selected.
Only the cursor 1 moves along the key input when "Cursor 1" is selected
and only cursor 2 moves when "Cursor 2" is selected. Also, both cursor
1 and 2 moves when "1 and 2" is selected.
4-4
165467-1CD

on the display, the cursor
HW1481803
36 of 48