YASKAWA DX200 Instructions Manual page 8

Pendant Oscilloscope
Function
Description of the Operation Procedure
Registered Trademark
Customer Support Information
In the explanation of the operation procedure, the expression "Select • • •"
means that the cursor is moved to the object item and the SELECT key is
pressed, or that the item is directly selected by touching the screen.
In this manual, names of companies, corporations, or products are
trademarks, registered trademarks, or brand names for each company or
corporation. The indications of (R) and TM are omitted.
If you need assistance with any aspect of your Pendant Oscilloscope
Function system, please contact Motoman Customer Support at the
following 24-hour telephone number:
For routine technical inquiries, you can also contact Motoman Customer
Support at the following e-mail address:
techsupport@motoman.com
When using e-mail to contact Motoman Customer Support, please provide
a detailed description of your issue, along with complete contact
information. Please allow approximately 24 to 36 hours for a response to
your inquiry.
Please use e-mail for routine inquiries only. If you have an
urgent or emergency need for service, replacement parts,
NOTE
or information, you must contact Motoman Customer
Support at the telephone number shown above.
Please have the following information ready before you call:
• System
• Robot
• Primary Application
• Controller
• Software Version
• Robot Serial Number
• Robot Sales Order Number
viii
(937) 847-3200
Pendant Oscilloscope Function
DX200
Access information on the
Programming Pendant's LCD
display screen by selecting {MAIN
MENU} - {SYSTEM INFO} -
{VERSION}
Located on the robot data plate
Located on the DX200 controller
data plate
HW1481803
165467-1CD
8 of 48