Dedicated Output Signal - YASKAWA DX200 Instructions Manual

Pendant Oscilloscope
Function

4.4.2 Dedicated Output Signal

50907 50906 50905
SOUT#720 SOUT#719 SOUT#718
51177 51176 51175
SOUT#936 SOUT#935 SOUT#934
OSC
SAVE ERROR



4 Other Functions
4.4 Operation Function by Dedicated Input
Displays PP oscilloscope operation status. When PP oscilloscope is not
running, all signals are OFF.
50904 50903
SOUT#717 SOUT#716
MEASURING
PP-OSC
51174 51173
SOUT#933 SOUT#932
OSC OSC
SAVING MEAS.ERROR
50903: Pendant Oscilloscope Under Measurement
Notifies that measurement is currently performed.
State
Only this signal varies regardless of S2C1244 setting.
51170: Pendant Oscilloscope Running
Notifies that PP oscilloscope is running.
State
This signal is turned ON even if PP oscilloscope is in minimized
status.
51171: Pendant Oscilloscope Minimized
Notifies that PP oscilloscope is in minimized status.
State
PP oscilloscope is minimized by the following factors:
• The {MINIMIZE} button is pressed.
• An alarm or an error occurs.
SUPPLE-
MENT
The minimized status can be cancelled by selecting {Pendant
oscilloscope} from the main menu or using the start
requesting signal (40760).
4-10
50902 50901 50900
SOUT#715 SOUT#714 SOUT#713
51172 51171 51170
SOUT#931 SOUT#930 SOUT#929
OSC I/O OSC OSC
READY MINIMIZE RUNNING
HW1481803
165467-1CD
42 of 48