Alcatel-Lucent 1830 PSS-16 Maintenance And Trouble-Clearing User Manual page 687

Supporting procedures
Card-Specific Troubleshooting
....................................................................................................................................................................................................................................
At the end of each step wait to see if the fault clears. If not, continue with the next step.
...................................................................................................................................................................................................
1 Perform a cold reset of the WTOCM.
CLI
WEBUI
...................................................................................................................................................................................................
2 Replace the WTOCM pack (see
E
N D O F
...................................................................................................................................................................................................
Nonredundant PSS-36 and MT0C Clock Source
In the PSS-36 the clock source is provided by the MT0C pack. If the MT0C pack is
removed from a nonredundant (simplex) PSS-36 system, service will be affected. Do not
remove the MT0C pack in a nonredundant configuration where traffic is present.
....................................................................................................................................................................................................................................
1830 PSS-36/PSS–32/PSS-16/PSS-4
8DG60888CAAA Release 3.6.0 and 3.6.1
Issue 1 June 2011
config card card type shelf slot reset cold
Select the card, click the
S T E P S
Egress Adjustment Failure and Clock Source (WTOCM and
Reboot tab, select
"Replacing a Card (General)" (p.
Cold Reboot > Submit .
3-22)).
PF)
3-79