Alcatel-Lucent 1830 PSS-16 Maintenance And Trouble-Clearing User Manual page 498

1830 pss series photonic service switch
Table of Contents

Advertisement

Trouble-clearing procedures
PCSGENERATOR
....................................................................................................................................................................................................................................
PCSGENERATOR
PCSGENERATOR (PCS Generator active)
The PCSGENERATOR condition is raised when the by Test signal loopback test is in
progress at the 100GA/D client port.
Severity
Service affecting?
Applicability
...................................................................................................................................................................................................
1
CLI
WEBUI
E
N D
O F
...................................................................................................................................................................................................
PLM
PLM (Payload Mismatch Indication - ODU)
The OT port has detected a Payload Type Mismatch condition at ODUk Path layer. This
defect indicates that the service and/or mapping types on two ends of the ODUkP link
don't match. The Payload Type indicator is encoded in the Payload Structure Identifier
field of ODUkP. When expected and received PT values don't match, a PLM condition is
declared.
This condition is typically declared on both ends of the ODUkP path.
This may be caused due to inconsistent provisioning of service/mapping types on the two
ends of the ODUkP segment (between two 11STAR1 OTs or between 11STAR1 and
11STMM10).
Severity
....................................................................................................................................................................................................................................
2-248
NA
No
112SA1L, 112SCA1
config interface
c1 loopback testsignal disabled
Select the card. On the Port Loopback Control window, deselect (uncheck)
the Test Signal Loopback Enabled field.
S T E P S
NA
PCSGENERATOR (PCS Generator active)
card_type shelf slot
1830 PSS-36/PSS–32/PSS-16/PSS-4
8DG60888CAAA Release 3.6.0 and 3.6.1
Issue 1 June 2011

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

1830 pss-321830 pss-361830 pss-4

Table of Contents