Alcatel-Lucent 1830 PSS-16 Maintenance And Trouble-Clearing User Manual page 357

Trouble-clearing procedures
FWUPGRADEPENDING
....................................................................................................................................................................................................................................
The two 4DPA4 card modes (FlexMux and DualTran) each have their own separate
firmware lines. When card mode is provisioned, the default version of the appropriate
firmware line is loaded automatically. Thus, FWUPGRADEPENDING may also apply to
a mismatch between the provisioned 4DPA4 card mode value and the current FPGA
contents.
Severity
Service affecting?
Applicability
Corrective Action
A cold reset, reseat, or replacement of a card is service impacting if the card is currently
carrying services. To determine if any services are currently carried over a card, perform
the procedure
If there are services currently carried over the card, it may be best to wait for a
maintenance window before resetting, replacing, or reseating the card.
At the end of each step wait to see if the fault clears. If not, continue with the next step.
...................................................................................................................................................................................................
To initiate a cold reset to download the recommended firmware version for the affected
1
pack, perform a cold reset of the card.
CLI
WEBUI
Note: Refer to Caution at the beginning of this procedure.
...................................................................................................................................................................................................
2 Contact your next level of support.
E
N D O F
...................................................................................................................................................................................................
....................................................................................................................................................................................................................................
1830 PSS-36/PSS–32/PSS-16/PSS-4
8DG60888CAAA Release 3.6.0 and 3.6.1
Issue 1 June 2011
NA
No
112SA1L, 112SCA1, 112SCX10, 112SX10L, 11DPE12E,
11DPM12, 11STAR1, 11STMM10, 11STGE12, 43SCX4,
43STA1P, 43STX4, 43STX4P, 4DPA2, 4DPA4, ALPHG, AHPHG,
AHPLG, ALPFGT, CWR8, CWR8-88, MESH4, MVAC, OPS,
OSCT, SVAC, WTOCM
NOTICE
Service-disruption hazard
"Reseating a Card" (p.
config card
Select the card, click the
S T E P S
FWUPGRADEPENDING (Firmware upgrade pending)
3-19).
card_type shelf slot
reset cold
Reboot tab, select Cold Reboot > Submit .
2-107